#FLIR LEPTON CAMERA MODULE FULL#

Input Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.

Sensor Technology: Uncooled VOx microbolometer.

Non-Uniformity Correction (NUC): Automatic with shutter.

Image Optimization: Factory configured and fully automated.

Execute on-board image processing without the need for an external system or SBC. This is a development kit ready to be embedded into a production system. It has four mounting holes and USB DFU in a tiny package.

Array format: 80 × 60, progressive scan PureThermal Mini is a hackable thermal webcam for the FLIR Lepton (2.x - 3.x) LWIR camera core.

This is why we are excited to introduce to you a new cost-effective solution called the Teledyne FLIR Lepton FS module a non-radiometric 160 x 120 resolution micro thermal camera module that sells for about half the price of an.

Optimum Temperature Range: -10☌ to +80☌ We all know that getting thermal cameras that are based on FLIR Lepton modules can really be much of a budget to plan for if you’re considering getting one.

Non-Operating Temperature Range: -40 ☌ to +80 ☌.

Mechanical Interface: 32–pin socket interface to standard Molex® socket.

Package Dimensions - Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mm.

Control Port: CCI (I2C-like), CMOS IO Voltage Levels camera used in this work, which is shown in Figure 1, is a complete long-wave infrared (LWIR) camera module that captures infrared radiation input in.

Output image independent of camera temperature.

Spectral Range: Longwave infrared, 8 µm to 14 µm.

Scene Dynamic Range: -10-140 ☌ (high gain) up to 450☌ (low gain) typical.

Radiometric Accuracy: High gain: Greater of +/- 5☌ or 5% (typical) Low gain: Greater of +/- 10☌ or 10% (typical).

Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied).

Input Clock: 25-MHz nominal, CMOS IO Voltage Levels.

Effective Frame Rate: 8.6 Hz (commercial application exportable).

#FLIR LEPTON CAMERA MODULE FULL#

It provides a wide range of functionality from adjustable memory footprint size, adjustable temperature display mode, fast chip select enable/disable routines, to exposing the full functionality of the thermal camera itself. The radiometric Lepton captures accurate, calibrated, and non-contact temperature data in every pixel. This library allows communication with boards running a Lepton FLiR thermal camera module. Using focal plane arrays of either 160x120 or 80圆0 active pixels. With a focal plane array of 80圆0 active pixels, this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The FLIR Lepton® is a radiometric-capable LWIR OEM camera solution that is smaller than a dime, fits inside a smartphone, and is one tenth the cost of traditional IR cameras. The FLIR Lepton® 2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared (LWIR) camera solution that is smaller than a dime, fits inside a smartphone, and is less expensive than traditional IR cameras.

Flir lepton camera module